Product code: 13-16 sold Fusion Camera ES7T-19G490-AA
13-16 OEM Ford Fusion Rear View Camera Park Assist ES7T-19G490-AA FoMoCo. Condition is Used. 1. Remove hatch fabric panel 2. Disconnect 3 exposed wiring sold harness molex plugs 3. Remove both tail lights (1 lock washer under, 2 on side per light) 4. Remove 4 lock nuts holding bottom plastic trim which houses camera and trunk-release button 5. Twist far ends of trim to release slide-retention clip on each side of trim. Trim slides out from underneath Ford emblem 6. Flip released trim forwards slowly to pull wiring through grommet without damaging. Alternatively grommet can be popped out temporarily 7. Torx bit releases camera bracket All done!.
13-16 OEM Ford Fusion Rear View Camera Park Assist ES7T-19G490-AA FoMoCo. Condition is Used. 1. Remove hatch fabric panel 2. Disconnect 3 exposed wiring sold harness molex plugs 3. Remove both tail lights (1 lock washer under, 2 on side per light) 4. Remove 4 lock nuts holding bottom plastic trim which houses camera and trunk-release button 5. Twist far ends of trim to release slide-retention clip on each side of trim. Trim slides out from underneath Ford emblem 6. Flip released trim forwards slowly to pull wiring through grommet without damaging. Alternatively grommet can be popped out temporarily 7. Torx bit releases camera bracket All done!.