Product code: EasyWring RinseClean Spin Mop and Bucket System Hands-Free System sold
sold Instructions Instructions: (1) Remove clean water tank from the bucket. (2) Ensure water release lever is down in closed is down in closed position. Remove blue fill cap and fill tank with water. (Optional: Add favorite cleaning solution to water). (3) After filling, close the blue fill cap and place clean water tank back into bucket. (4) Lift the red water release lever to open. The rinsing chamber will fill with clean water. Red lever can remain open. (5) Place mop inside rinsing chamber. Twist mop to wet/rinse the mop head. (6) Place wet mop inside wringer. (7) Loosely hold handle vertically to allow mop to spin. (8) Push pedal to customize moisture level. (9) Mop floor and repeat steps 5-8 as needed. Use & Care: To remove: Step on mop strands and tilt handle away from your foot to separate base from mop head. To Wash (Do not use fabric softeners or bleach): Machine or hand wash warm water and lay flat to dry. To Replace: Align microfiber mop head with base and push down until it sn.
sold Instructions Instructions: (1) Remove clean water tank from the bucket. (2) Ensure water release lever is down in closed is down in closed position. Remove blue fill cap and fill tank with water. (Optional: Add favorite cleaning solution to water). (3) After filling, close the blue fill cap and place clean water tank back into bucket. (4) Lift the red water release lever to open. The rinsing chamber will fill with clean water. Red lever can remain open. (5) Place mop inside rinsing chamber. Twist mop to wet/rinse the mop head. (6) Place wet mop inside wringer. (7) Loosely hold handle vertically to allow mop to spin. (8) Push pedal to customize moisture level. (9) Mop floor and repeat steps 5-8 as needed. Use & Care: To remove: Step on mop strands and tilt handle away from your foot to separate base from mop head. To Wash (Do not use fabric softeners or bleach): Machine or hand wash warm water and lay flat to dry. To Replace: Align microfiber mop head with base and push down until it sn.